Why do electric outlets get warm sometimes?

Why do electric outlets get warm sometimes?

Sometimes, when electrical outlets get hotter than usual, people don’t pay as much attention as they should because, usually, they don’t know that a change in outlet temperature could represent a problem.

It is important to know that electrical outlets should never be hot. For this reason, whenever you find one that is, you should follow these steps:

  1. Unplug your electronics from the outlet. Have in mind that cell phone chargers and printers, for example, use internal transformers that change the voltage input warming the outlet, but never to the point that it’s too hot to touch.
  2. After you’ve unplugged the transformer-containing device, wait an hour for the outlet to go back to its regular temperature. To test that the outlet is working properly, plug a non-transformer-containing device and, if it doesn’t heat up again, then your electrical outlet is fine.

Sometimes, the outlet gets hot even though nothing is plugged in. The reason why this happens is because most home circuits are wired in series. In other words, the electrical current used by one outlet might also pass through many others. As a result, an outlet might get hotter than usual because there’s an electrical overload.

Outlets can overheat because the electrical circuit is carrying more current than it should. The most common cause of an overload is the use of a high wattage appliance or a combination of high wattage appliances. For instance, a toaster and a coffee maker being used simultaneously. An overload can also occur when outlets are too old. Old outlets are dangerous because they could have loose wiring connections. For this reason, bad connections can generate fires.

My best advice to you would be to find the circuit breaker that controls that hot outlet and turn it off. After doing that, you can give me a call, and I would be more than happy to go help you fix that problem to make sure your home is safe from danger.

Annual Gainesville Community Band Mother’s Day Concert

Annual Gainesville Community Band Mother’s Day Concert

It’s that time of the year again where we get to celebrate the best of the best, our mothers. It’s an annual rite of spring and one of my favorite events of the year — the Gainesville Community Band Mother’s Day Concert at Trinity United Methodist at 3 p.m., Sunday, May 13. As happens every year, your favorite electrician will be right there, and instead of a screwdriver, he will have his trumpet in hand.

This is my sixth year in the band, but I was involved in music long before that. I started playing trumpet while in elementary school and never stopped. In fact, this passion took me to the University of Florida as a music major.

The band was founded in 1974 with 11 members, and today, we are more than 80 musicians. Our members include teachers, scientists, professors, students and other members of the community. Besides participating in the Mother’s Day Concert, we also perform at the Charles Dean Trumpet Memorial Concert, the James B. King Veterans Day Concert and Fanfare and Fireworks at the University of Florida to celebrate Independence Day. We also played at the Heart of Florida airshow and on the Walt Disney World’s Fantasy Land stage as their first nonprofessional adult concert band.

I love being part of the band, and I especially appreciate the enjoyment our performances bring to the audience, especially for our Mother’s Day Concert.

In case you’re interested, you can hear the Gainesville Community Band on our website, http://www.gnvband.org.

How to prevent rodent damage to your electrical work

Family of squirrels nesting in house roof attic.

Sometimes, we encounter unwanted visitors such as rats, squirrels, raccoons and mice who, unintentionally, can cause us electrical issues at home. One thing rodents have in common is that they love chewing our wiring system. The reason why they enjoy doing this is because their front teeth never finish growing. Therefore, the chewing controls the length of their incisors.

As a homeowner myself, I understand how frustrating this situation can be. When it comes to damages, a rodent can cause permanent appliance damage by generating power surges and arcing. If chewing is left unchecked, rodents can chew your whole electrical system; and they can cause a fire because they leave your wires exposed.

Although I’m not a rodent hunter, I have suggestions that might help you prevent this from happening:

  1. Limit access into crawl spaces under the home by sealing openings or using wire hardware cloth over ventilation opening.
  2. Limit access into attic spaces by assuring that soffits and exterior roof train have no holes for rodent entry.
  3. Limit access to your roof. In other words, get rid of overhanging branches that provide rodents with the opportunity to climb or jump onto your roof.
  4. Leave your trash outside your home and in a separate container.
  5. Don’t leave dog and/or cat food outside as a convenient food source for unwanted animals.

If you already have rodents in your home, the best thing you can do is to call pest control so they can take care of them. After that, it is very important to fix your wiring. If this is the case, please don’t hesitate to contact me.

Surge Protector Buying Guide

What is an electrical surge?

An electrical surge is an intense, short-duration voltage increase that travels through electrical wiring or other cables that transmit data or energy – for example, phone lines and coaxial cables for TV reception. Common causes of electrical surges include:

  • Lightning strikes
  • Power outages
  • Downed power lines
  • Tripped circuit breakers
  • Accidents and malfunctions at the power company
  • On/off cycles of large appliances and tools

What is a surge protector?

A surge protector is designed to protect any device with a standard AC plug from damaging power surges and disruptive line noise transferred through the electrical wall outlet. Some surge protectors include protection for phone lines, network connections, and coaxial connections for cable, antenna or satellite TV reception.

NOTE: Be careful not to confuse a surge protector with a power strip. They look very similar, but a power strip provides only an extension cord and additional outlets, with no protection against surges.

How does a surge protector work?

When the voltage rises above the accepted level, the surge protector suppresses the excess voltage to prevent it from causing harm. Specifically, internal components called metal oxide varistors absorb the excess voltage and divert it to the ground wire, preventing it from reaching the connected equipment. To function effectively, a surge protector must be connected to a properly wired and grounded AC outlet. Some surge protectors include LEDs that alert users to possible wiring problems.

What should you consider when buying a surge protector?

  • How many outlets you need
  • What level of protection you want
  • What type of equipment you will be plugging into your surge protector
  • Eco-friendly solutions
  • Environment
  • Cord length and plug design
  • Indicator lights.

Holiday Lighting Safety

The holiday season is here, which means you are probably getting ready to decorate your home inside and out! Colorful lighting is a fun way to show your holiday spirit, but it must be placed with caution. If using old lighting, check the strands for cracked cords, frayed ends or loose connections. If using new lights, make sure to inspect them before use.

Here are some tips to follow to have a safe holiday season:

#1 Inspect Light Strings

Discard any that are damaged because they may be a fire hazard.

#2 Replace Burned-Out Bulbs

Empty sockets may cause the entire string to overheat so replace them as soon as possible.

#3 Make Sure Outdoor Lighting is Weather Resistant

It is extremely important to make sure you are buying the correct lighting for the conditions you are using it in. The same goes for extension cords.

#4 Don’t Attach Light Strings with Nails or Staples

They can cut through the wire insulation and create a fire hazard. Instead use outdoor approved hangers.

#5 Take Exterior Lights Down Within 90 Days

Sometimes we get lazy and leave lights up for months after the holiday season. The longer they stay up, the more likely they are to suffer damage, so remove them as soon as possible.

#6 Store Lights Safely

Tangled lights can lead to damaged cords and empty sockets. After the holidays, wrap each string loosely around a piece of cardboard, fold fabric over it to protect the bulbs, and store it in a container until next year.

If you have any lighting concerns this holiday season, make sure to call Eaton Electric.

Rechargeable Batteries 101


In recent years, the need for rechargeable batteries, also known as secondary cells, has grown due to the increase in portable technology. This includes laptops, cell phones, cameras and more. They have been around since 1859 when French physicist Gaston Plante invented the lead acid cell, which is the oldest type of rechargeable battery.

How They Work

Rechargeable batteries work by fully restoring its energy capacity when an electric current is applied to them. Just like we go to sleep every night to restore our energy for the next day. They are considered to be electrochemical cells, which produce a finite amount of energy, which once depleted can be recharged by reversing the chemical reaction with the aid of a charging current supplied by the battery charger.

Types of Rechargeable Batteries

  1. Lead-acid batteries

One of the most common secondary batteries, used primarily for storing large cell potential. These are commonly found in automobile engines.  Its advantages include low cost, high voltage and large storage of cell potential; and disadvantages include heavy mass, reduced output at low-temperatures, and inability to maintain its potential for long periods of time through disuse.

  1. The nickel-cadmium

The nickel-cadmium battery is another common secondary battery that is suited for low-temperature conditions with a long shelf life. However, the nickel-cadmium batteries are more expensive and their capacity in terms of watt-hours per kilogram is less than that of the nickel-zinc rechargeable batteries.

  1. Silver-zinc batteries

A less commonly used rechargeable battery, is capable of providing high currents, high voltage, and is equivalent in watt-hour capacity to six lead-acid batteries. These are commonly seen as the little silver buttons in hearing aids, tiny flash lights and so on. Because of its high energy density, silver-zinc batteries are used in missiles and torpedoes, electronics, satellites, and compact portable devices.

Veteran’s Day Annual Celebration Concert

As many of you know, one of my passions is playing in the Gainesville Community Band. I’ve been playing trumpet in the band for six years. We play multiple times during the year, but one of my favorites has to be the James B. King Veteran’s Day Concert because of the group for whom we are playing.

James King and his wife, Joy, were members of the Gainesville Community Band for 26 years. He passed away in 2006. As native of Charleston, S.C., he enlisted in the Army where he performed on troop ships crossing the Atlantic during WWII. In 1946, he joined the Marine Band, where he served as principal clarinet and assistant conductor until his retirement in 1968.

It is a privilege and an honor to perform in this concert as our small way of honoring our veterans. This year, the event will be held on Nov. 5 at 4 p.m. at the First Presbyterian Church located at 300 SW Second Ave.

With Veteran’s Day being celebrated the following Saturday, Nov. 11, consider joining us as we honor James King and all veterans in this annual event.

For more information about Gainesville Community Band, please visit their website: